From a754011fc58e83f38cadc5bc10492ab961c9c540 Mon Sep 17 00:00:00 2001 From: justsaumit Date: Wed, 2 Mar 2022 11:23:45 +0530 Subject: spring cleaning 0.1 --- .../tests/test-highlighting.zsh | 291 +++++++++++++++++++++ 1 file changed, 291 insertions(+) create mode 100755 .config/zsh/plugins/zsh-syntax-highlighting/tests/test-highlighting.zsh (limited to '.config/zsh/plugins/zsh-syntax-highlighting/tests/test-highlighting.zsh') diff --git a/.config/zsh/plugins/zsh-syntax-highlighting/tests/test-highlighting.zsh b/.config/zsh/plugins/zsh-syntax-highlighting/tests/test-highlighting.zsh new file mode 100755 index 0000000..8b564a8 --- /dev/null +++ b/.config/zsh/plugins/zsh-syntax-highlighting/tests/test-highlighting.zsh @@ -0,0 +1,291 @@ +#!/usr/bin/env zsh +# ------------------------------------------------------------------------------------------------- +# Copyright (c) 2010-2017 zsh-syntax-highlighting contributors +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, are permitted +# provided that the following conditions are met: +# +# * Redistributions of source code must retain the above copyright notice, this list of conditions +# and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright notice, this list of +# conditions and the following disclaimer in the documentation and/or other materials provided +# with the distribution. +# * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors +# may be used to endorse or promote products derived from this software without specific prior +# written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR +# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND +# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR +# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER +# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT +# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# ------------------------------------------------------------------------------------------------- +# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*- +# vim: ft=zsh sw=2 ts=2 et +# ------------------------------------------------------------------------------------------------- + + +setopt NO_UNSET WARN_CREATE_GLOBAL + +# Required for add-zle-hook-widget. +zmodload zsh/zle + +local -r root=${0:h:h} +local -a anon_argv; anon_argv=("$@") + +(){ +set -- "${(@)anon_argv}" +# Check an highlighter was given as argument. +[[ -n "$1" ]] || { + echo >&2 "Bail out! You must provide the name of a valid highlighter as argument." + exit 2 +} + +# Check the highlighter is valid. +[[ -f $root/highlighters/$1/$1-highlighter.zsh ]] || { + echo >&2 "Bail out! Could not find highlighter ${(qq)1}." + exit 2 +} + +# Check the highlighter has test data. +[[ -d $root/highlighters/$1/test-data ]] || { + echo >&2 "Bail out! Highlighter ${(qq)1} has no test data." + exit 2 +} + +# Set up results_filter +local results_filter +if [[ ${QUIET-} == y ]]; then + if type -w perl >/dev/null; then + results_filter=$root/tests/tap-filter + else + echo >&2 "Bail out! quiet mode not supported: perl not found"; exit 2 + fi +else + results_filter=cat +fi +[[ -n $results_filter ]] || { echo >&2 "Bail out! BUG setting \$results_filter"; exit 2 } + +# Load the main script. +# While here, test that it doesn't eat aliases. +print > >($results_filter | $root/tests/tap-colorizer.zsh) -r -- "# global (driver) tests" +print > >($results_filter | $root/tests/tap-colorizer.zsh) -r -- "1..1" +alias -- +plus=plus +alias -- _other=other +local original_alias_dash_L_output="$(alias -L)" +. $root/zsh-syntax-highlighting.zsh +if [[ $original_alias_dash_L_output == $(alias -L) ]]; then + print -r -- "ok 1 # 'alias -- +foo=bar' is preserved" +else + print -r -- "not ok 1 # 'alias -- +foo=bar' is preserved" + exit 1 +fi > >($results_filter | $root/tests/tap-colorizer.zsh) + +# Overwrite _zsh_highlight_add_highlight so we get the key itself instead of the style +_zsh_highlight_add_highlight() +{ + region_highlight+=("$1 $2 $3") +} + +# Activate the highlighter. +ZSH_HIGHLIGHT_HIGHLIGHTERS=($1) + +# In zsh<5.3, 'typeset -p arrayvar' emits two lines, so we use this wrapper instead. +typeset_p() { + for 1 ; do + if [[ ${(tP)1} == *array* ]]; then + print -r -- "$1=( ${(@qqqqP)1} )" + else + print -r -- "$1=${(qqqqP)1}" + fi + done +} + +# Escape # as ♯ and newline as ↵ they are illegal in the 'description' part of TAP output +# The string to escape is «"$@"»; the result is returned in $REPLY. +tap_escape() { + local s="${(j. .)@}" + REPLY="${${s//'#'/♯}//$'\n'/↵}" +} + +# Runs a highlighting test +# $1: data file +run_test_internal() { + + local tests_tempdir="$1"; shift + local srcdir="$PWD" + builtin cd -q -- "$tests_tempdir" || { echo >&2 "Bail out! On ${(qq)1}: cd failed: $?"; return 1 } + + # Load the data and prepare checking it. + local BUFFER CURSOR MARK PENDING PREBUFFER REGION_ACTIVE WIDGET REPLY skip_test fail_test unsorted=0 + local expected_mismatch + local skip_mismatch + local -a expected_region_highlight region_highlight + + local ARG="$1" + local RETURN="" + () { + setopt localoptions + + # WARNING: The remainder of this anonymous function will run with the test's options in effect + if { ! . "$srcdir"/"$ARG" } || (( $#fail_test )); then + print -r -- "1..1" + print -r -- "## ${ARG:t:r}" + tap_escape $fail_test; fail_test=$REPLY + print -r -- "not ok 1 - failed setup: $fail_test" + return ${RETURN:=0} + fi + + (( $#skip_test )) && { + print -r -- "1..0 # SKIP $skip_test" + print -r -- "## ${ARG:t:r}" + return ${RETURN:=0} + } + + # Check the data declares $PREBUFFER or $BUFFER. + [[ -z $PREBUFFER && -z $BUFFER ]] && { echo >&2 "Bail out! On ${(qq)ARG}: Either 'PREBUFFER' or 'BUFFER' must be declared and non-blank"; return ${RETURN:=1}; } + [[ $PREBUFFER == (''|*$'\n') ]] || { echo >&2 "Bail out! On ${(qq)ARG}: PREBUFFER=${(qqqq)PREBUFFER} doesn't end with a newline"; return ${RETURN:=1}; } + + # Set sane defaults for ZLE variables + : ${CURSOR=$#BUFFER} ${PENDING=0} ${WIDGET=z-sy-h-test-harness-test-widget} + + # Process the data. + _zsh_highlight + }; [[ -z $RETURN ]] || return $RETURN + unset ARG + + integer print_expected_and_actual=0 + + if (( unsorted )); then + region_highlight=("${(@n)region_highlight}") + expected_region_highlight=("${(@n)expected_region_highlight}") + fi + + # Print the plan line, and some comments for human readers + echo "1..$(( $#expected_region_highlight + 1))" + echo "## ${1:t:r}" # note: tests/edit-failed-tests looks for the "##" emitted by this line + [[ -n $PREBUFFER ]] && printf '# %s\n' "$(typeset_p PREBUFFER)" + [[ -n $BUFFER ]] && printf '# %s\n' "$(typeset_p BUFFER)" + + local i + for ((i=1; i<=$#expected_region_highlight; i++)); do + local -a expected_highlight_zone; expected_highlight_zone=( ${(z)expected_region_highlight[i]} ) + integer exp_start=$expected_highlight_zone[1] exp_end=$expected_highlight_zone[2] + local todo= + if (( $+expected_highlight_zone[4] )); then + todo="# TODO $expected_highlight_zone[4]" + skip_mismatch="cardinality check disabled whilst regular test points are expected to fail" + fi + if ! (( $+region_highlight[i] )); then + print -r -- "not ok $i - unmatched expectation ($exp_start $exp_end $expected_highlight_zone[3])" \ + "${skip_mismatch:+"# TODO ${(qqq)skip_mismatch}"}" + if [[ -z $skip_mismatch ]]; then (( ++print_expected_and_actual )); fi + continue + fi + local -a highlight_zone; highlight_zone=( ${(z)region_highlight[i]} ) + integer start=$(( highlight_zone[1] + 1 )) end=$highlight_zone[2] + local desc="[$start,$end] «${BUFFER[$start,$end]}»" + tap_escape $desc; desc=$REPLY + if + [[ $start != $exp_start ]] || + [[ $end != $exp_end ]] || + [[ ${highlight_zone[3]%,} != ${expected_highlight_zone[3]} ]] # remove the comma that's before the memo field + then + print -r -- "not ok $i - $desc - expected ($exp_start $exp_end ${(qqq)expected_highlight_zone[3]}), observed ($start $end ${(qqq)highlight_zone[3]}). $todo" + if [[ -z $todo ]]; then (( ++print_expected_and_actual )); fi + else + print -r -- "ok $i - $desc${todo:+ - }$todo" + fi + unset expected_highlight_zone + unset exp_start exp_end + unset todo + unset highlight_zone + unset start end + unset desc + done + + # If both $skip_mismatch and $expected_mismatch are set, that means the test + # has some XFail test points, _and_ explicitly sets $expected_mismatch as + # well. Explicit settings should have priority, so we ignore $skip_mismatch + # if $expected_mismatch is set. + if [[ -n $skip_mismatch && -z $expected_mismatch ]]; then + tap_escape $skip_mismatch; skip_mismatch=$REPLY + print "ok $i - cardinality check" "# SKIP $skip_mismatch" + else + local todo + if [[ -n $expected_mismatch ]]; then + tap_escape $expected_mismatch; expected_mismatch=$REPLY + todo="# TODO $expected_mismatch" + fi + if (( $#expected_region_highlight == $#region_highlight )); then + print -r -- "ok $i - cardinality check${todo:+ - }$todo" + else + local details + details+="have $#expected_region_highlight expectations and $#region_highlight region_highlight entries: " + details+="«$(typeset_p expected_region_highlight)» «$(typeset_p region_highlight)»" + tap_escape $details; details=$REPLY + print -r -- "not ok $i - cardinality check - $details${todo:+ - }$todo" + if [[ -z $todo ]]; then (( ++print_expected_and_actual )); fi + fi + fi + if (( print_expected_and_actual )); then + () { + local -a left_column right_column + left_column=( "expected_region_highlight" "${(qq)expected_region_highlight[@]}" ) + right_column=( "region_highlight" "${(qq)region_highlight[@]}" ) + integer difference=$(( $#right_column - $#left_column )) + repeat $difference do left_column+=(.); done + paste \ + =(print -rC1 -- $left_column) \ + =(print -rC1 -- $right_column) \ + | if type column >/dev/null; then column -t -s $'\t'; else cat; fi \ + | sed 's/^/# /' + } + fi +} + +# Run a single test file. The exit status is 1 if the test harness had +# an error and 0 otherwise. The exit status does not depend on whether +# test points succeeded or failed. +run_test() { + # Do not combine the declaration and initialization: «local x="$(false)"» does not set $?. + local __tests_tempdir + __tests_tempdir="$(mktemp -d)" && [[ -d $__tests_tempdir ]] || { + echo >&2 "Bail out! mktemp failed"; return 1 + } + typeset -r __tests_tempdir # don't allow tests to override the variable that we will 'rm -rf' later on + + { + # Use a subshell to isolate tests from each other. + # (So tests can alter global shell state using 'cd', 'hash', etc) + { + # These braces are so multios don't come into play. + { (run_test_internal "$__tests_tempdir" "$@") 3>&1 >&2 2>&3 } | grep \^ + local ret=$pipestatus[1] stderr=$pipestatus[2] + if (( ! stderr )); then + # stdout will become stderr + echo "Bail out! On ${(qq)1}: output on stderr"; return 1 + else + return $ret + fi + } 3>&1 >&2 2>&3 + } always { + rm -rf -- "$__tests_tempdir" + } +} + +# Process each test data file in test data directory. +integer something_failed=0 +ZSH_HIGHLIGHT_STYLES=() +local data_file +for data_file in $root/highlighters/$1/test-data/*.zsh; do + run_test "$data_file" | tee >($results_filter | $root/tests/tap-colorizer.zsh) | grep -v '^not ok.*# TODO' | grep -Eq '^not ok|^ok.*# TODO' && (( something_failed=1 )) + (( $pipestatus[1] )) && exit 2 +done + +exit $something_failed +} -- cgit v1.2.3