neovim addition

58 files changed, 1548 insertions, 0 deletions

diff --git a/.scripts/4chget b/.scripts/4chget
new file mode 100755
index 0000000..41fd446
--- /dev/null
+++ b/.scripts/4chget
@@ -0,0 +1,24 @@
+#!/bin/bash
+
+echo "Welcome to 4chan web/image scrapping script"
+#echo -e "What would you like to do?\r\n1)sync from phone to pc 2)sync from pc to phone "
+echo "Is it wallpaper/general (wg) or anime wallpaper (w)?"
+read option
+echo "Enter folder name:"
+read dir
+echo "Enter thread no.: (#######)"
+read thread
+if [[ $option = w ]] ; then
+ 	mkdir -p /home/$USER/Pictures/Wallpaper/4chget/w/$dir
+else
+	mkdir -p /home/$USER/Pictures/Wallpaper/4chget/wg/$dir
+fi
+
+case "$option" in
+	"wg")
+		wget -P Pictures/Wallpaper/4chget/wg/$dir -nd -r -l 1 -H -D i.4cdn.org,is2.4chan.org -A png,jpg,jpeg -R '?????????????s.*' https://boards.4chan.org/wg/thread/$thread ;;
+
+	"w")
+		wget -P Pictures/Wallpaper/4chget/w/$dir -nd -r -l 1 -H -D i.4cdn.org,is2.4chan.org -A png,jpg,jpeg -R '?????????????s.*' https://boards.4channel.org/w/thread/$thread ;;
+esac
+
diff --git a/.scripts/4chgetw b/.scripts/4chgetw
new file mode 100755
index 0000000..efdb038
--- /dev/null
+++ b/.scripts/4chgetw
@@ -0,0 +1,19 @@
+#!/bin/bash
+
+option=$(echo -e "wg\nw" | dmenu -p "Is it wallpaper/general (wg) or anime wallpaper (w)?")
+thread=$(echo "" | dmenu -p "Enter thread no.: (#######)")
+dir=$(echo "" | dmenu -p "Enter folder name")    
+
+if [[ $option = w ]] ; then
+        mkdir -p /home/saumit/Pictures/Wallpaper/4chget/w/$dir
+    else
+            mkdir -p /home/saumit/Pictures/Wallpaper/4chget/wg/$dir
+fi
+
+case "$option" in
+        "wg")
+                wget -P Pictures/Wallpaper/4chget/wg/$dir -nd -r -l 1 -H -D i.4cdn.org,is2.4chan.org -A png,jpg,jpeg -R '?????????????s.*' https://boards.4chan.org/wg/thread/$thread ;;
+
+        "w")
+                 wget -P Pictures/Wallpaper/4chget/w/$dir -nd -r -l 1 -H -D i.4cdn.org,is2.4chan.org -A png,jpg,jpeg -R '?????????????s.*' https://boards.4channel.org/w/thread/$thread ;;
+ esac
diff --git a/.scripts/battery b/.scripts/battery
new file mode 100755
index 0000000..1f308a5
--- /dev/null
+++ b/.scripts/battery
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+# Prints all batteries, their percentage remaining and an emoji corresponding
+# to charge status (🔌 for plugged up, 🔋 for discharging on battery, etc.).
+
+case $BLOCK_BUTTON in
+	3) notify-send "🔋 Battery module" "🔋: discharging
+🛑: not charging
+♻ : stagnant charge
+🔌: charging
+⚡: charged
+❗: battery very low!
+- Scroll to change adjust xbacklight." ;;
+	4) xbacklight -inc 10 ;;
+	5) xbacklight -dec 10 ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# Loop through all attached batteries and format the info
+for battery in /sys/class/power_supply/BAT?*; do
+	# If non-first battery, print a space separator.
+	[ -n "${capacity+x}" ] && printf " "
+	# Sets up the status and capacity
+	case "$(cat "$battery/status" 2>&1)" in
+		"Full") status="⚡" ;;
+		"Discharging") status="🔋" ;;
+		"Charging") status="🔌" ;;
+		"Not charging") status="🛑" ;;
+		"Unknown") status="♻️ " ;;
+		*) exit 1 ;;
+	esac
+	capacity="$(cat "$battery/capacity" 2>&1)"
+	# Will make a warn variable if discharging and low
+	[ "$status" = "🔋" ] && [ "$capacity" -le 25 ] && warn="❗"
+	# Prints the info
+	printf "%s%s%d%%" "$status" "$warn" "$capacity"; unset warn
+done && printf "\\n"
diff --git a/.scripts/bts b/.scripts/bts
new file mode 100755
index 0000000..7b85aac
--- /dev/null
+++ b/.scripts/bts
@@ -0,0 +1,37 @@
+#!/bin/bash
+option=$(echo -e "Connect\nDisconnect\nChange profile"| dmenu -p "Do you wish to connect/disconnect or change soundprofile of your bluetooth device:") 
+MAC=$(echo "A1:B3:EC:B1:53:60")
+case $option in
+    "Connect")
+        status=$(systemctl status bluetooth | grep Active | cut -d " " -f 7)
+        case $status in
+      	    "active") 
+        	bluetoothctl power on
+            bluetoothctl connect $MAC && sleep 2 && [ $(bluetoothctl info $MAC|grep "Connected"|awk -F'[:][ ]' '/^[^#]/{print $2}') == "yes" ] && notify-send "Connected" "Bluetooth Device is connected" ||  notify-send "Unable to connect!" "Check whether the bluetooth device is switched on.";;
+	    
+            "inactive" | "failed")
+    		sudo -A systemctl start bluetooth
+	    	#st -e sudo systemctl start bluetooth &&
+		    notify-send "Bluetooth daemon is running"
+		    bluetoothctl power on
+		    bluetoothctl connect $MAC && sleep 1 && [ $(bluetoothctl info $MAC|grep "Connected"|awk -F'[:][ ]' '/^[^#]/{print $2}') == "yes" ] && notify-send "Connected" "Bluetooth Device is disconnected" ||  notify-send "Unable to connect!" "Check whether the bluetooth device is switched on.";
+            esac;;     
+
+    "Disconnect")
+            bluetoothctl power off && sudo -A systemctl stop bluetooth
+            notify-send "Disconnected" "Bluetooth Device is connected" || notify-send "Unable to connect!" "Check whether the bluetooth device is switched on.";;
+
+    "Change profile")
+        past_profile=$(pactl list | grep "Active Profile" | sed '2p;d' | cut -d ' ' -f 3)
+        profile=$(echo -e "a2dp_sink(pure audio output)\nhandsfree_head_unit(inferior audio output + mic enable)" | dmenu -p "Choose the profile for your sound card")
+        cardindex=$(pacmd list-cards | grep 'index' | awk 'NR==2' | cut -d ' ' -f6)
+
+        case $profile in
+            "a2dp_sink(pure audio output)")
+                pactl set-card-profile $cardindex a2dp_sink &&
+                dunstify "Switched card profile from $past_profile to $profile" -i audio-headphones;;
+            "handsfree_head_unit(inferior audio output + mic enable)")
+                pactl set-card-profile $cardindex handsfree_head_unit
+                notify-send "Switched card profile from $past_profile to $profile" -i audio-headset;;
+        esac
+esac
diff --git a/.scripts/clock b/.scripts/clock
new file mode 100755
index 0000000..d25e8d0
--- /dev/null
+++ b/.scripts/clock
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+clock=$(date '+%I')
+
+case "$clock" in
+	"00") icon="🕛" ;;
+	"01") icon="🕐" ;;
+	"02") icon="🕑" ;;
+	"03") icon="🕒" ;;
+	"04") icon="🕓" ;;
+	"05") icon="🕔" ;;
+	"06") icon="🕕" ;;
+	"07") icon="🕖" ;;
+	"08") icon="🕗" ;;
+	"09") icon="🕘" ;;
+	"10") icon="🕙" ;;
+	"11") icon="🕚" ;;
+	"12") icon="🕛" ;;
+esac
+
+case $BLOCK_BUTTON in
+	1) notify-send "This Month" "$(cal --color=always | sed "s/..7m/<b><span color=\"red\">/;s/..27m/<\/span><\/b>/")" && notify-send "Appointments" "$(calcurse -d3)" ;;
+	2) setsid -f "$TERMINAL" -e calcurse ;;
+	3) notify-send "📅 Time/date module" "\- Left click to show upcoming appointments for the next three days via \`calcurse -d3\` and show the month via \`cal\`
+- Middle click opens calcurse if installed" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+date "+%Y %b %d (%a) $icon%I:%M%p"
diff --git a/.scripts/cpu b/.scripts/cpu
new file mode 100755
index 0000000..1572b52
--- /dev/null
+++ b/.scripts/cpu
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+case $BLOCK_BUTTON in
+	1) notify-send "🖥 CPU hogs" "$(ps axch -o cmd:15,%cpu --sort=-%cpu | head)\\n(100% per core)" ;;
+	2) setsid -f "$TERMINAL" -e htop ;;
+	3) notify-send "🖥 CPU module " "\- Shows CPU temperature.
+- Click to show intensive processes.
+- Middle click to open htop." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+sensors | awk '/Core 0/ {print "🌡" $3}'
diff --git a/.scripts/cpubars b/.scripts/cpubars
new file mode 100755
index 0000000..f318b87
--- /dev/null
+++ b/.scripts/cpubars
@@ -0,0 +1,44 @@
+#!/bin/sh
+
+# Module showing CPU load as a changing bars.
+# Just like in polybar.
+# Each bar represents amount of load on one core since
+# last run.
+
+# Cache in tmpfs to improve speed and reduce SSD load
+cache=/tmp/cpubarscache
+
+case $BLOCK_BUTTON in
+	2) setsid -f "$TERMINAL" -e htop ;;
+	3) notify-send "🪨 CPU load module" "Each bar represents
+one CPU core";;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# id total idle
+stats=$(awk '/cpu[0-9]+/ {printf "%d %d %d\n", substr($1,4), ($2 + $3 + $4 + $5), $5 }' /proc/stat)
+[ ! -f $cache ] && echo "$stats" > "$cache"
+old=$(cat "$cache")
+printf "🪨"
+echo "$stats" | while read -r row; do
+	id=${row%% *}
+	rest=${row#* }
+	total=${rest%% *}
+	idle=${rest##* }
+
+	case "$(echo "$old" | awk '{if ($1 == id)
+		printf "%d\n", (1 - (idle - $3)  / (total - $2))*100 /12.5}' \
+		id="$id" total="$total" idle="$idle")" in
+
+		"0") printf "▁ ";;
+		"1") printf "▂ ";;
+		"2") printf "▃ ";;
+		"3") printf "▄ ";;
+		"4") printf "▅ ";;
+		"5") printf "▆ ";;
+		"6") printf "▇ ";;
+		"7") printf "█ ";;
+		"8") printf "█ ";;
+	esac
+done; printf "\\n"
+echo "$stats" > "$cache"
diff --git a/.scripts/dcalc b/.scripts/dcalc
new file mode 100755
index 0000000..5355f4b
--- /dev/null
+++ b/.scripts/dcalc
@@ -0,0 +1,4 @@
+#!/bin/sh
+Equation=$(echo "" | dmenu -n -p "Enter equation" | xargs -I % calc %)
+
+notify-send "Result" "$Equation"
diff --git a/.scripts/disk b/.scripts/disk
new file mode 100755
index 0000000..e947509
--- /dev/null
+++ b/.scripts/disk
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+# Status bar module for disk space
+# $1 should be drive mountpoint, otherwise assumed /.
+
+location=${1:-/}
+
+[ -d "$location" ] || exit
+
+case $BLOCK_BUTTON in
+	1) notify-send "💽 Disk space" "$(df -h --output=target,used,size)" ;;
+	3) notify-send "💽 Disk module" "\- Shows used hard drive space.
+- Click to show all disk info." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+case "$location" in
+	"/home"* ) icon="🏠" ;;
+	"/mnt"* ) icon="💾" ;;
+	*) icon="🖥";;
+esac
+
+printf "%s: %s\n" "$icon" "$(df -h "$location" | awk ' /[0-9]/ {print $3 "/" $2}')"
diff --git a/.scripts/dmenuhandler b/.scripts/dmenuhandler
new file mode 100755
index 0000000..ce9159d
--- /dev/null
+++ b/.scripts/dmenuhandler
@@ -0,0 +1,21 @@
+#!/bin/sh
+
+# Feed this script a link and it will give dmenu
+# some choice programs to use to open it.
+feed="${1:-$(printf "%s" | dmenu -p 'Paste URL or file path')}"
+
+case "$(printf "Copy URL\\nsxiv\\nsetbg\\nPDF\\nbrowser\\nlynx\\nvim\\nmpv\\nmpv loop\\nmpv float\\nqueue download\\nqueue yt-dl\\nqueue yt-dl audio" | dmenu -i -p "Open it with?")" in
+	"Copy URL") echo "$feed" | xclip -selection clipboard ;;
+	mpv) setsid -f mpv -quiet "$feed" >/dev/null 2>&1 ;;
+	"mpv loop") setsid -f mpv -quiet --loop "$feed" >/dev/null 2>&1 ;;
+	"mpv float") setsid -f "$TERMINAL" -e mpv --geometry=+0-0 --autofit=30%  --title="mpvfloat" "$feed" >/dev/null 2>&1 ;;
+	"queue yt-dl") qndl "$feed" >/dev/null 2>&1 ;;
+	"queue yt-dl audio") qndl "$feed" 'youtube-dl --add-metadata -icx -f bestaudio/best' >/dev/null 2>&1 ;;
+	"queue download") qndl "$feed" 'curl -LO' >/dev/null 2>&1 ;;
+	PDF) curl -sL "$feed" > "/tmp/$(echo "$feed" | sed "s/.*\///;s/%20/ /g")" && zathura "/tmp/$(echo "$feed" | sed "s/.*\///;s/%20/ /g")"  >/dev/null 2>&1 ;;
+	sxiv) curl -sL "$feed" > "/tmp/$(echo "$feed" | sed "s/.*\///;s/%20/ /g")" && sxiv -a "/tmp/$(echo "$feed" | sed "s/.*\///;s/%20/ /g")"  >/dev/null 2>&1 ;;
+	vim) curl -sL "$feed" > "/tmp/$(echo "$feed" | sed "s/.*\///;s/%20/ /g")" && setsid -f "$TERMINAL" -e "$EDITOR" "/tmp/$(echo "$feed" | sed "s/.*\///;s/%20/ /g")"  >/dev/null 2>&1 ;;
+	setbg) curl -L "$feed" > $XDG_CACHE_HOME/pic ; xwallpaper --zoom $XDG_CACHE_HOME/pic >/dev/null 2>&1 ;;
+	browser) setsid -f "$BROWSER" "$feed" >/dev/null 2>&1 ;;
+	lynx) lynx "$feed" >/dev/null 2>&1 ;;
+esac
diff --git a/.scripts/dmount b/.scripts/dmount
new file mode 100755
index 0000000..7449574
--- /dev/null
+++ b/.scripts/dmount
@@ -0,0 +1,67 @@
+#!/bin/sh
+
+# Gives a dmenu prompt to mount unmounted drives and Android phones. If
+# they're in /etc/fstab, they'll be mounted automatically. Otherwise, you'll
+# be prompted to give a mountpoint from already existsing directories. If you
+# input a novel directory, it will prompt you to create that directory.
+
+getmount() { \
+	[ -z "$chosen" ] && exit 1
+        # shellcheck disable=SC2086
+	mp="$(find $1 2>/dev/null | dmenu -i -p "Type in mount point.")" || exit 1
+	test -z "$mp" && exit 1
+	if [ ! -d "$mp" ]; then
+		mkdiryn=$(printf "No\\nYes" | dmenu -i -p "$mp does not exist. Create it?") || exit 1
+		[ "$mkdiryn" = "Yes" ] && (mkdir -p "$mp" || sudo -A mkdir -p "$mp")
+	fi
+	}
+
+mountusb() { \
+	chosen="$(echo "$usbdrives" | dmenu -i -p "Mount which drive?")" || exit 1
+	chosen="$(echo "$chosen" | awk '{print $1}')"
+	sudo -A mount "$chosen" 2>/dev/null && dunstify "USB mounting" "$chosen mounted." -i media-removable && exit 0
+	alreadymounted=$(lsblk -nrpo "name,type,mountpoint" | awk '$3!~/\/boot|\/home$|SWAP/&&length($3)>1{printf "-not ( -path *%s -prune ) ",$3}')
+	getmount "/mnt /media /mount /home -maxdepth 5 -type d $alreadymounted"
+	partitiontype="$(lsblk -no "fstype" "$chosen")"
+	case "$partitiontype" in
+		"vfat") sudo -A mount -t vfat "$chosen" "$mp" -o rw,umask=0000;;
+		"exfat") sudo -A mount "$chosen" "$mp" -o uid="$(id -u)",gid="$(id -g)";;
+		*) sudo -A mount "$chosen" "$mp"; user="$(whoami)"; ug="$(groups | awk '{print $1}')"; sudo -A chown "$user":"$ug" "$mp";;
+	esac
+	dunstify "USB mounting" "$chosen mounted to $mp." -i media-removable
+	}
+
+mountandroid() { \
+	chosen="$(echo "$anddrives" | dmenu -i -p "Which Android device?")" || exit 1
+	chosen="$(echo "$chosen" | cut -d : -f 1)"
+	getmount "$HOME -maxdepth 3 -type d"
+        simple-mtpfs --device "$chosen" "$mp"
+	echo "OK" | dmenu -i -p "Tap Allow on your phone if it asks for permission and then press enter" || exit 1
+	simple-mtpfs --device "$chosen" "$mp"
+	dunstify "Android Mounting" "Android device mounted to $mp." -i phone
+	}
+
+asktype() { \
+	choice="$(printf "USB\\nAndroid" | dmenu -i -p "Mount a USB drive or Android device?")" || exit 1
+	case $choice in
+		USB) mountusb ;;
+		Android) mountandroid ;;
+	esac
+	}
+
+anddrives=$(simple-mtpfs -l 2>/dev/null)
+usbdrives="$(lsblk -rpo "name,type,size,mountpoint" | grep 'part\|rom' | awk '$4==""{printf "%s (%s)\n",$1,$3}')"
+
+if [ -z "$usbdrives" ]; then
+	[ -z "$anddrives" ] && echo "No USB drive or Android device detected" && exit
+	echo "Android device(s) detected."
+	mountandroid
+else
+	if [ -z "$anddrives" ]; then
+		echo "USB drive(s) detected."
+		mountusb
+	else
+		echo "Mountable USB drive(s) and Android device(s) detected."
+		asktype
+	fi
+fi
diff --git a/.scripts/dmrsyncfon b/.scripts/dmrsyncfon
new file mode 100755
index 0000000..6d01cb6
--- /dev/null
+++ b/.scripts/dmrsyncfon
@@ -0,0 +1,24 @@
+#!/bin/bash
+
+echo "Welcome to rsyncfon a fon to pc and vice-versa file-syncing script using the rsync algorithm!"
+echo -e "What would you like to do?\r\n1)sync from phone to pc 2)sync from pc to phone "
+read option
+case "$option" in
+	"1")
+		echo -e "Enter public IP on mobile device (starting with 192.): \r\n!Make sure the device and the desktop are connected to the same network!"
+		read IP
+		echo "Enter file/folder to be rsync'd (Leave empty if entire sdcard) (/sdcard/*)"
+		read file
+		echo "Enter desination path on PC \r\n!!!Make sure to check whether it had sufficient space or not!!!"
+		read dest
+		rsync --update --progress -e 'ssh -p 2222' -azv $IP:/sdcard/$file $dest;;
+	"2")
+		echo "Enter file/folder from pc to be rsync'd"
+		read file
+		echo "Enter public IP"
+		read IP
+		echo "Enter destination location( /sdcard/*)"
+		read dest
+		rsync --update --progress -e 'ssh -p 2222' -azv $file root@$IP:$dest
+esac
+
diff --git a/.scripts/dumount b/.scripts/dumount
new file mode 100755
index 0000000..946d12c
--- /dev/null
+++ b/.scripts/dumount
@@ -0,0 +1,44 @@
+#!/bin/sh
+
+# A dmenu prompt to unmount drives.
+# Provides you with mounted partitions, select one to unmount.
+# Drives mounted at /, /boot and /home will not be options to unmount.
+
+unmountusb() {
+	[ -z "$drives" ] && exit
+	chosen="$(echo "$drives" | dmenu -i -p "Unmount which drive?")" || exit 1
+	chosen="$(echo "$chosen" | awk '{print $1}')"
+	[ -z "$chosen" ] && exit
+	sudo -A umount "$chosen" && notify-send "💻 USB unmounting" "$chosen unmounted."
+	}
+
+unmountandroid() { \
+	chosen="$(awk '/simple-mtpfs/ {print $2}' /etc/mtab | dmenu -i -p "Unmount which device?")" || exit 1
+	[ -z "$chosen" ] && exit
+	sudo -A umount -l "$chosen" && notify-send "🤖 Android unmounting" "$chosen unmounted."
+	}
+
+asktype() { \
+	choice="$(printf "USB\\nAndroid" | dmenu -i -p "Unmount a USB drive or Android device?")" || exit 1
+	case "$choice" in
+		USB) unmountusb ;;
+		Android) unmountandroid ;;
+	esac
+	}
+
+drives=$(lsblk -nrpo "name,type,size,mountpoint,label" | awk -F':' '{gsub(/ /,":")}$4!~/\/boot|\/efi|\/home$|SWAP/&&length($4)>1{printf "%s (%s) %s\n",$4,$3,$5}')
+
+if ! grep simple-mtpfs /etc/mtab; then
+	[ -z "$drives" ] && echo "No drives to unmount." &&  exit
+	echo "Unmountable USB drive detected."
+	unmountusb
+else
+	if [ -z "$drives" ]
+	then
+		echo "Unmountable Android device detected."
+	       	unmountandroid
+	else
+		echo "Unmountable USB drive(s) and Android device(s) detected."
+		asktype
+	fi
+fi
diff --git a/.scripts/emojisel b/.scripts/emojisel
new file mode 100755
index 0000000..adab4eb
--- /dev/null
+++ b/.scripts/emojisel
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+# The famous "get a menu of emojis to copy" script.
+
+# Get user selection via dmenu from emoji file.
+chosen=$(cut -d ';' -f1 ~/.local/share/emoji | dmenu -i -l 30 | sed "s/ .*//")
+
+# Exit if none chosen.
+[ -z "$chosen" ] && exit
+
+# If you run this command with an argument, it will automatically insert the
+# character. Otherwise, show a message that the emoji has been copied.
+if [ -n "$1" ]; then
+	xdotool type "$chosen"
+else
+	printf "$chosen" | xclip -sel c
+	notify-send "'$chosen' copied to clipboard." &
+fi
+
diff --git a/.scripts/emojiselw b/.scripts/emojiselw
new file mode 100755
index 0000000..9e6f055
--- /dev/null
+++ b/.scripts/emojiselw
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+# The famous "get a menu of emojis to copy" script.
+
+# Get user selection via dmenu from emoji file.
+windowsid=$(xdotool getactivewindow)
+chosen=$(cut -d ';' -f1 ~/.local/share/emoji | dmenu -i -l 30 -w $windowsid | sed "s/ .*//")
+# Exit if none chosen.
+[ -z "$chosen" ] && exit
+
+# If you run this command with an argument, it will automatically insert the
+# character. Otherwise, show a message that the emoji has been copied.
+if [ -n "$1" ]; then
+	xdotool type "$chosen"
+else
+	printf "$chosen" | xclip -sel c
+	notify-send "'$chosen' copied to clipboard." &
+fi
+
diff --git a/.scripts/fmenu b/.scripts/fmenu
new file mode 100755
index 0000000..d0c6fce
--- /dev/null
+++ b/.scripts/fmenu
@@ -0,0 +1,77 @@
+#!/bin/bash
+
+usage()
+{
+    cat << EOF
+usage: $0 options
+
+Index and search files using dmenu
+
+OPTIONS:
+   -h      Show this message
+   -o      Store index [default: /tmp/fmenu_index]
+   -i      Search folders [default: $HOME]
+   -x      Exclude files [default: ".*\/..*" (i.e. dot-files)]
+   -d      dmenu parameters [default: -i -l 20]
+   -f      force reloading index [default: false]
+   -t      time [default: 5min]
+   -u      Just update the index
+EOF
+}
+
+FORCE=false
+INDEX="/tmp/fmenu_index"
+DMENU="-i -l 20"
+TIME="+5"
+INPUT=$HOME
+EXCLUDE='.*/\..*'
+DRY=false
+while getopts "ht:fd:o:i:x:u" OPTION
+do
+     case $OPTION in
+         h)
+             usage
+             exit 1
+             ;;
+         f)
+             FORCE=true
+             ;;
+         d)
+             DMENU=$OPTARG
+             ;;
+         t)
+             TIME=$OPTARG
+             ;;
+         o)
+             INDEX=$OPTARG
+             ;;
+         i)
+             INPUT=$OPTARG
+             ;;
+         x)
+             EXCLUDE=$OPTARG
+             ;;
+         u)
+             FORCE=true
+             DRY=true
+             ;;
+         ?)
+             usage
+             exit
+             ;;
+     esac
+done
+
+function index_files {
+    find "$INPUT" \( ! -regex "$EXCLUDE" \) | sed 's/ /\\ /g' | sort -f > "$INDEX"
+}
+
+if [[ ! -a "$INDEX" ]] ||  ( test `find $INDEX -mmin $TIME` ) || ($FORCE)
+then
+    index_files
+fi
+
+if ( ! $DRY )
+then
+    cat "$INDEX" | `dmenu $DMENU > /tmp/dmenu_find_output.txt` && cat /tmp/dmenu_find_output.txt | xargs xdg-open
+fi
diff --git a/.scripts/hotrebootdwm b/.scripts/hotrebootdwm
new file mode 100755
index 0000000..9768709
--- /dev/null
+++ b/.scripts/hotrebootdwm
@@ -0,0 +1,4 @@
+#!/bin/sh
+##pid=$(ps -a | grep dwm | awk '{print $1}')
+pid=$(pidof dwm)
+kill -HUP $pid
diff --git a/.scripts/internet b/.scripts/internet
new file mode 100755
index 0000000..94b7da2
--- /dev/null
+++ b/.scripts/internet
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+# Show wifi 📶 and percent strength or 📡 if none.
+# Show 🌐 if connected to ethernet or ❎ if none.
+# Show 🔒 if a vpn connection is active
+
+case $BLOCK_BUTTON in
+	1) "$TERMINAL" -e nmtui; pkill -RTMIN+4 dwmblocks ;;
+	3) notify-send "🌐 Internet module" "\- Click to connect
+❌: wifi disabled
+📡: no wifi connection
+📶: wifi connection with quality
+❎: no ethernet
+🌐: ethernet working
+🔒: vpn is active
+" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+if grep -xq 'up' /sys/class/net/w*/operstate 2>/dev/null ; then
+	wifiicon="$(awk '/^\s*w/ { print "📶", int($3 * 100 / 70) "% " }' /proc/net/wireless)"
+elif grep -xq 'down' /sys/class/net/w*/operstate 2>/dev/null ; then
+	grep -xq '0x1003' /sys/class/net/w*/flags && wifiicon="📡 " || wifiicon="❌ "
+fi
+
+printf "%s%s%s\n" "$wifiicon" "$(sed "s/down/❎/;s/up/🌐/" /sys/class/net/e*/operstate 2>/dev/null)" "$(sed "s/.*/🔒/" /sys/class/net/tun*/operstate 2>/dev/null)"
diff --git a/.scripts/iplocate b/.scripts/iplocate
new file mode 100755
index 0000000..1fcb696
--- /dev/null
+++ b/.scripts/iplocate
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+# Gets your public ip address checks which country you are in and
+# displays that information in the statusbar
+#
+# https://www.maketecheasier.com/ip-address-geolocation-lookups-linux/
+
+addr="$(curl ifconfig.me 2>/dev/null)" || exit
+grep "flag: " "${XDG_DATA_HOME:-$HOME/.local/share}/emoji" | grep "$(geoiplookup "$addr" | sed 's/.*, //')" | sed "s/flag: //;s/;.*//"
diff --git a/.scripts/linkhandler b/.scripts/linkhandler
new file mode 100644
index 0000000..fa74caf
--- /dev/null
+++ b/.scripts/linkhandler
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+# Feed script a url or file location.
+# If an image, it will view in sxiv,
+# if a video or gif, it will view in mpv
+# if a music file or pdf, it will download,
+# otherwise it opens link in browser.
+
+# If no url given. Opens browser. For using script as $BROWSER.
+[ -z "$1" ] && { "$BROWSER"; exit; }
+
+case "$1" in
+	*mkv|*webm|*mp4|*youtube.com/watch*|*youtube.com/playlist*|*youtu.be*|*hooktube.com*|*bitchute.com*|*videos.lukesmith.xyz*|*odysee.com*)
+		setsid -f mpv -quiet "$1" >/dev/null 2>&1 ;;
+	*png|*jpg|*jpe|*jpeg|*gif)
+		curl -sL "$1" > "/tmp/$(echo "$1" | sed "s/.*\///;s/%20/ /g")" && sxiv -a "/tmp/$(echo "$1" | sed "s/.*\///;s/%20/ /g")"  >/dev/null 2>&1 & ;;
+	*pdf|*cbz|*cbr)
+		curl -sL "$1" > "/tmp/$(echo "$1" | sed "s/.*\///;s/%20/ /g")" && zathura "/tmp/$(echo "$1" | sed "s/.*\///;s/%20/ /g")"  >/dev/null 2>&1 & ;;
+	*mp3|*flac|*opus|*mp3?source*)
+		qndl "$1" 'curl -LO'  >/dev/null 2>&1 ;;
+	*)
+		[ -f "$1" ] && setsid -f "$TERMINAL" -e "$EDITOR" "$1" >/dev/null 2>&1 || setsid -f "$BROWSER" "$1" >/dev/null 2>&1
+esac
diff --git a/.scripts/memory b/.scripts/memory
new file mode 100755
index 0000000..56a236c
--- /dev/null
+++ b/.scripts/memory
@@ -0,0 +1,12 @@
+#!/bin/sh
+
+case $BLOCK_BUTTON in
+	1) notify-send "🧠 Memory hogs" "$(ps axch -o cmd:15,%mem --sort=-%mem | head)" ;;
+	2) setsid -f "$TERMINAL" -e htop ;;
+	3) notify-send "🧠 Memory module" "\- Shows Memory Used/Total.
+- Click to show memory hogs.
+- Middle click to open htop." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+free --mebi | sed -n '2{p;q}' | awk '{printf ("🧠%2.1fGB/16GB\n", ( $3 / 1024), ($2 / 1024))}'
diff --git a/.scripts/mntwindows b/.scripts/mntwindows
new file mode 100755
index 0000000..5adb9c5
--- /dev/null
+++ b/.scripts/mntwindows
@@ -0,0 +1,7 @@
+#!/bin/sh
+
+sudo mount /dev/nvme0n1p3 /home/C
+sudo mount /dev/nvme0n1p4 /home/D
+sudo mount /dev/nvme0n1p5 /home/E
+sudo mount /dev/nvme0n1p6 /home/F
+sudo mount /dev/nvme0n1p7 /home/G
diff --git a/.scripts/nettraf b/.scripts/nettraf
new file mode 100755
index 0000000..eb7a73b
--- /dev/null
+++ b/.scripts/nettraf
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+# Module showing network traffic. Shows how much data has been received (RX) or
+# transmitted (TX) since the previous time this script ran. So if run every
+# second, gives network traffic per second.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e bmon ;;
+	3) notify-send "🌐 Network traffic module" "🔻: Traffic received
+🔺: Traffic transmitted" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+update() {
+    sum=0
+    for arg; do
+        read -r i < "$arg"
+        sum=$(( sum + i ))
+    done
+    cache=${XDG_CACHE_HOME:-$HOME/.cache}/${1##*/}
+    [ -f "$cache" ] && read -r old < "$cache" || old=0
+    printf %d\\n "$sum" > "$cache"
+    printf %d\\n $(( sum - old ))
+}
+
+rx=$(update /sys/class/net/[ew]*/statistics/rx_bytes)
+tx=$(update /sys/class/net/[ew]*/statistics/tx_bytes)
+
+printf "🔻%4sB 🔺%4sB\\n" $(numfmt --to=iec $rx) $(numfmt --to=iec $tx)
diff --git a/.scripts/not needed/doppler b/.scripts/not needed/doppler
new file mode 100755
index 0000000..dc93db0
--- /dev/null
+++ b/.scripts/not needed/doppler
@@ -0,0 +1,206 @@
+#!/bin/sh
+
+# Show a Doppler RADAR of an American user's preferred location.
+
+secs=600 # Download a new doppler radar if one hasn't been downloaded in $secs seconds.
+radarloc="${XDG_CACHE_HOME:-$HOME/.cache}/radar"
+doppler="${XDG_CACHE_HOME:-$HOME/.cache}/doppler.gif"
+
+pickloc() { chosen="$(echo "Northeast
+Southeast
+PacNorthWest
+PacSouthWest
+UpperMissVly
+SouthMissVly
+SouthPlains
+NorthRockies
+SouthRockies
+Alaska
+Carib
+Hawaii
+CentGrLakes
+Conus-Large
+KABR: Aberdeen, SD
+KBIS: Bismarck, ND
+KFTG: Denver/Boulder, CO
+KDMX: Des Moines, IA
+KDTX: Detroit, MI
+KDDC: Dodge City, KS
+KDLH: Duluth, MN
+KCYS: Cheyenne, WY
+KLOT: Chicago, IL
+KGLD: Goodland, KS
+KUEX: Hastings, NE
+KGJX: Grand Junction, CO
+KGRR: Grand Rapids, MI
+KMVX: Fargo/Grand Forks, ND
+KGRB: Green Bay, WI
+KIND: Indianapolis, IN
+KJKL: Jackson, KY
+KARX: La Crosse, WI
+KILX: Lincoln/Central Illinois, IL
+KLVX: Louisville, KY
+KMQT: Marquette
+KMKX: Milwaukee, WI
+KMPX: Minneapolis, MN
+KAPX: Gaylord/Alpena, MI
+KLNX: North Platte, NE
+KIWX: N. Webster/Northern, IN
+KOAX: Omaha, NE
+KPAH: Paducah, KY
+KEAX: Pleasant Hill, MO
+KPUX: Pueblo, CO
+KDVN: Quad Cities, IA
+KUDX: Rapid City, SD
+KRIW: Riverton, WY
+KSGF: Springfield, MO
+KLSX: St. LOUIS, MO
+KFSD: Sioux Falls, IA
+KTWX: Topeka, KS
+KICT: Wichita, KS
+KVWX: Paducah, KY
+ICAO: Responsible Wfo
+KLTX: WILMINGTON, NC
+KCCX: State College/Central, PA
+KLWX: Sterling, VA
+KFCX: Blacksburg/Roanoke, VA
+KRAX: Raleigh/Durham, NC
+KGYX: Portland, ME
+KDIX: Mt Holly/Philadelphia, PA
+KPBZ: Pittsburgh, PA
+KAKQ: Wakefield, VA
+KMHX: Morehead City, NC
+KGSP: Greer/Greenville/Sprtbg, SC
+KILN: Wilmington/Cincinnati, OH
+KCLE: Cleveland, OH
+KCAE: Columbia, SC
+KBGM: Binghamton, NY
+KENX: Albany, NY
+KBUF: Buffalo, NY
+KCXX: Burlington, VT
+KCBW: Caribou, ME
+KBOX: Boston /Taunton, MA
+KOKX: New York City, NY
+KCLX: Charleston, SC
+KRLX: Charleston, WV
+ICAO: Responsible WFO
+KBRO: Brownsville, TX
+KABX: Albuquerque, NM
+KAMA: Amarillo, TX
+KFFC: Peachtree City/Atlanta, GA
+KEWX: Austin/Sanantonio, TX
+KBMX: Birmingham, AL
+KCRP: Corpus Christi, TX
+KFWS: Dallas / Ft. Worth, TX
+KEPZ: El Paso, TX
+KHGX: Houston/ Galveston, TX
+KJAX: Jacksonville, FL
+KBYX: Key West, FL
+KMRX: Morristown/knoxville, TN
+KLBB: Lubbock, TX
+KLZK: Little Rock, AR
+KLCH: Lake Charles, LA
+KOHX: Nashville, TN
+KMLB: Melbourne, FL
+KNQA: Memphis, TN
+KAMX: Miami, FL
+KMAF: Midland/odessa, TX
+KTLX: Norman, OK
+KHTX: Huntsville, AL
+KMOB: Mobile, AL
+KTLH: Tallahassee, FL
+KTBW: Tampa Bay Area, FL
+KSJT: San Angelo, TX
+KINX: Tulsa, OK
+KSRX: Tulsa, OK
+KLIX: New Orleans/slidell, LA
+KDGX: Jackson, MS
+KSHV: Shreveport, LA
+ICAO: Responsible WFO
+KLGX: Seattle / Tacoma, WA
+KOTX: Spokane, WA
+KEMX: Tucson, AZ
+KYUX: Phoenix, AZ
+KNKX: San Diego, CA
+KMUX: Monterey/san Francisco, CA
+KHNX: San Joaquin/hanford, CA
+KSOX: San Diego, CA
+KATX: Seattle / Tacoma, WA
+KIWA: Phoenix, AZ
+KRTX: Portland, OR
+KSFX: Pocatello, ID
+KRGX: Reno, NV
+KDAX: Sacramento, CA
+KMTX: Salt Lake City, UT
+KPDT: Pendleton, OR
+KMSX: Missoula, MT
+KESX: Las Vegas, NV
+KVTX: Los Angeles, CA
+KMAX: Medford, OR
+KFSX: Flagstaff, AZ
+KGGW: Glasgow, MT
+KLRX: Elko, NV
+KBHX: Eureka, CA
+KTFX: Great Falls, MT
+KCBX: Boise, ID
+KBLX: Billings, MT
+KICX: Salt Lake City, UT
+ICAO: Responsible Wfo W/ MSCF
+PABC: Anchorage, AK
+PAPD: Fairbanks, AK
+PHKM: Honolulu, HI
+PAHG: Anchorage, AK
+PAKC: Anchorage, AK
+PAIH: Anchorage, AK
+PHMO: Honolulu, HI
+PAEC: Fairbanks, AK
+TJUA: San Juan, PR
+PACG: Juneau, AK
+PHKI: Honolulu, HI
+PHWA: Honolulu, HI
+ICAO: Responsible Wfo W/ MSCF
+KFDR: Norman, OK
+PGUA: Guam
+KBBX: Sacramento, CA
+KFDX: Albuquerque, NM
+KGWX: Jackson, MS
+KDOX: Wakefield, VA
+KDYX: San Angelo, TX
+KEYX: Las Vegas, NV
+KEVX: Mobile, AL
+KHPX: Paducah, KY
+KTYX: Burlington, VT
+KGRK: Dallas / Ft. Worth, TX
+KPOE: Lake Charles, LA
+KEOX: Tallahassee, FL
+KHDX: El Paso, TX
+KDFX: San Antonio, TX
+KMXX: Birmingham, AL
+KMBX: Bismarck, ND
+KVAX: Jacksonville, FL
+KJGX: Peachtree City/atlanta, GA
+KVNX: Norman, OK
+KVBX: Vandenberg Afb: Orcutt, CA" | dmenu -r -i -l 50 -p "Select a National Weather Service radar to use as default:" | sed "s/:.*//" | tr "[:lower:]" "[:upper:]")"
+
+# Sanity check of selection and ensure user did not escape.
+echo "$chosen" | grep -q "^[A-Z]\+$" && echo "$chosen" > "$radarloc" ;}
+
+getdoppler() {
+	loc="$(cat "$radarloc")"
+	notify-send "🌦️ Doppler RADAR" "Pulling most recent Doppler RADAR for $loc."
+	curl -sL "https://radar.weather.gov/ridge/lite/${loc}_loop.gif" > "$doppler" ;}
+
+showdoppler() { setsid -f mpv --no-osc --loop=inf --no-terminal "$doppler" ;}
+
+case $BLOCK_BUTTON in
+	1) [ ! -f "$radarloc" ] && pickloc && getdoppler
+	[ $(($(date '+%s') - $(stat -c %Y "$doppler"))) -gt "$secs" ] && getdoppler
+	showdoppler ;;
+	2) pickloc && getdoppler && showdoppler ;;
+	3) notify-send "🗺️ Doppler RADAR module" "\- Left click for local Doppler RADAR.
+- Middle click to update change RADAR location.
+After $secs seconds, new clicks will also automatically update the doppler RADAR."  ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+echo 🗺️
diff --git a/.scripts/not needed/forecast b/.scripts/not needed/forecast
new file mode 100755
index 0000000..7b8416e
--- /dev/null
+++ b/.scripts/not needed/forecast
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+# Displays todays precipication chance (☔) and daily low (🥶) and high (🌞).
+# Usually intended for the statusbar.
+
+# If we have internet, get a weather report from wttr.in and store it locally.
+# You could set up a shell alias to view the full file in a pager in the
+# terminal if desired. This function will only be run once a day when needed.
+weatherreport="${XDG_DATA_HOME:-$HOME/.local/share}/weatherreport"
+getforecast() { curl -sf "wttr.in/$LOCATION" > "$weatherreport" || exit 1 ;}
+
+# Some very particular and terse stream manipulation. We get the maximum
+# precipitation chance and the daily high and low from the downloaded file and
+# display them with coresponding emojis.
+showweather() { printf "%s" "$(sed '16q;d' "$weatherreport" |
+	grep -wo "[0-9]*%" | sort -rn | sed "s/^/☔/g;1q" | tr -d '\n')"
+sed '13q;d' "$weatherreport" | grep -o "m\\([-+]\\)*[0-9]\\+" | sed 's/+//g' | sort -n -t 'm' -k 2n | sed -e 1b -e '$!d' | tr '\n|m' ' ' | awk '{print " 🥶" $1 "°","🌞" $2 "°"}' ;}
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e less -Srf "$weatherreport" ;;
+	2) getforecast && showweather ;;
+	3) notify-send "🌈 Weather module" "\- Left click for full forecast.
+- Middle click to update forecast.
+☔: Chance of rain/snow
+🥶: Daily low
+🌞: Daily high" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+# The test if our forcecast is updated to the day. If it isn't download a new
+# weather report from wttr.in with the above function.
+[ "$(stat -c %y "$weatherreport" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] ||
+	getforecast
+
+showweather
diff --git a/.scripts/not needed/help-icon b/.scripts/not needed/help-icon
new file mode 100755
index 0000000..8fa4a52
--- /dev/null
+++ b/.scripts/not needed/help-icon
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# The clickable help menu. Middle click to restart wm.
+
+# If dwm is running, use dwm's readme and restart.
+pidof dwm >/dev/null &&
+	READMEFILE=/usr/local/share/dwm/larbs.mom
+	restartwm() { pkill -HUP dwm ;} ||
+		restartwm() { i3 restart ;}
+
+case $BLOCK_BUTTON in
+	1) groff -mom "${READMEFILE:-${XDG_DATA_HOME:-$HOME/.local/share}/larbs/readme.mom}" -Tpdf | zathura - ;;
+	2) restartwm ;;
+	3) notify-send "❓ Help module" "\- Left click to open LARBS guide.
+- Middle click to refresh window manager." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac; echo "❓"
diff --git a/.scripts/not needed/kbselect b/.scripts/not needed/kbselect
new file mode 100755
index 0000000..f0c923f
--- /dev/null
+++ b/.scripts/not needed/kbselect
@@ -0,0 +1,16 @@
+#!/bin/sh
+# works on any init system
+# requirements: dmenu, xorg-setxkbmap
+kb="$(setxkbmap -query | grep -oP 'layout:\s*\K\w+')" || exit 1
+
+case $BLOCK_BUTTON in
+	1) kb_choice="$(awk '/! layout/{flag=1; next} /! variant/{flag=0} flag {print $2, "- " $1}' /usr/share/X11/xkb/rules/base.lst | dmenu -l 15)"
+	kb="$(echo "$kb_choice" | awk '{print $3}')"
+	setxkbmap "$kb"
+	pkill -RTMIN+30 "${STATUSBAR:-dwmblocks}";;
+	3) notify-send "⌨  Keyboard/language module" "$(printf "%s" "\- Current layout: $(setxkbmap -query | grep -oP 'layout:\s*\K\w+')")
+- Left click to change keyboard.";;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+echo "$kb"
diff --git a/.scripts/not needed/mailbox b/.scripts/not needed/mailbox
new file mode 100755
index 0000000..2132184
--- /dev/null
+++ b/.scripts/not needed/mailbox
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+# Displays number of unread mail and an loading icon if updating.
+# When clicked, brings up `neomutt`.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e neomutt ;;
+	2) setsid -f mw -Y >/dev/null ;;
+	3) notify-send "📬 Mail module" "\- Shows unread mail
+- Shows 🔃 if syncing mail
+- Left click opens neomutt
+- Middle click syncs mail" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+unread="$(find "${XDG_DATA_HOME:-$HOME/.local/share}"/mail/*/[Ii][Nn][Bb][Oo][Xx]/new/* -type f | wc -l 2>/dev/null)"
+
+pidof mbsync >/dev/null 2>&1 && icon="🔃"
+
+[ "$unread" = "0" ] && [ "$icon" = "" ] || echo "📬$unread$icon"
diff --git a/.scripts/not needed/moonphase b/.scripts/not needed/moonphase
new file mode 100755
index 0000000..fab8b4d
--- /dev/null
+++ b/.scripts/not needed/moonphase
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+# Shows the current moon phase.
+
+moonfile="${XDG_DATA_HOME:-$HOME/.local/share}/moonphase"
+
+[ "$(stat -c %y "$moonfile" 2>/dev/null | cut -d' ' -f1)" = "$(date '+%Y-%m-%d')" ] ||
+	{ curl -sf "wttr.in/?format=%m" > "$moonfile" || exit 1 ;}
+
+icon="$(cat "$moonfile")"
+
+case "$icon" in
+	🌑) name="New" ;;
+	🌒) name="Waxing Crescent" ;;
+	🌓) name="First Quarter" ;;
+	🌔) name="Waxing Gibbous" ;;
+	🌕) name="Full" ;;
+	🌖) name="Waning Gibbous" ;;
+	🌗) name="Last Quarter" ;;
+	🌘) name="Waning Crescent" ;;
+	*) exit 1 ;;
+esac
+
+echo "${icon-?}"
+
+case $BLOCK_BUTTON in
+	3) notify-send "🌜 Moon phase module" "Displays current moon phase.
+- 🌑: New
+- 🌒: Waxing Crescent
+- 🌓: First Quarter
+- 🌔: Waxing Gibbous
+- 🌕: Full
+- 🌖: Waning Gibbous
+- 🌗: Last Quarter
+- 🌘: Waning Crescent" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
diff --git a/.scripts/not needed/mpdup b/.scripts/not needed/mpdup
new file mode 100755
index 0000000..af81a7d
--- /dev/null
+++ b/.scripts/not needed/mpdup
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+# This loop will update the mpd statusbar module whenever a command changes the
+# music player's status. mpd must be running on X's start for this to work.
+
+while : ; do
+	mpc idle >/dev/null && kill -45 "$(pidof "${STATUSBAR:-dwmblocks}")" || break
+done
diff --git a/.scripts/not needed/music b/.scripts/not needed/music
new file mode 100755
index 0000000..7ea7032
--- /dev/null
+++ b/.scripts/not needed/music
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+filter() { mpc | sed "/^volume:/d;s/\\&/&amp;/g;s/\\[paused\\].*/⏸/g;/\\[playing\\].*/d;/^ERROR/Q" | paste -sd ' ' -;}
+
+pidof -x sb-mpdup >/dev/null 2>&1 || sb-mpdup >/dev/null 2>&1 &
+
+case $BLOCK_BUTTON in
+	1) mpc status | filter ; setsid -f "$TERMINAL" -e ncmpcpp ;;  # right click, pause/unpause
+	2) mpc toggle | filter ;;  # right click, pause/unpause
+	3) mpc status | filter ; notify-send "🎵 Music module" "\- Shows mpd song playing.
+- ⏸ when paused.
+- Left click opens ncmpcpp.
+- Middle click pauses.
+- Scroll changes track.";;  # right click, pause/unpause
+	4) mpc prev   | filter ;;  # scroll up, previous
+	5) mpc next   | filter ;;  # scroll down, next
+	6) mpc status | filter ; "$TERMINAL" -e "$EDITOR" "$0" ;;
+	*) mpc status | filter ;;
+esac
diff --git a/.scripts/not needed/news b/.scripts/not needed/news
new file mode 100755
index 0000000..fe701db
--- /dev/null
+++ b/.scripts/not needed/news
@@ -0,0 +1,17 @@
+#!/bin/sh
+
+# Displays number of unread news items and an loading icon if updating.
+# When clicked, brings up `newsboat`.
+
+case $BLOCK_BUTTON in
+        1) setsid "$TERMINAL" -e newsboat ;;
+	2) setsid -f newsup >/dev/null exit ;;
+        3) notify-send "📰 News module" "\- Shows unread news items
+- Shows 🔃 if updating with \`newsup\`
+- Left click opens newsboat
+- Middle click syncs RSS feeds
+<b>Note:</b> Only one instance of newsboat (including updates) may be running at a time." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+ cat /tmp/newsupdate 2>/dev/null || echo "$(newsboat -x print-unread | awk '{ if($1>0) print "📰" $1}')$(cat "${XDG_CONFIG_HOME:-$HOME/.config}"/newsboat/.update 2>/dev/null)"
diff --git a/.scripts/not needed/pacpackages b/.scripts/not needed/pacpackages
new file mode 100755
index 0000000..37ebed3
--- /dev/null
+++ b/.scripts/not needed/pacpackages
@@ -0,0 +1,29 @@
+#!/bin/sh
+
+# Displays number of upgradeable packages.
+# For this to work, have a `pacman -Sy` command run in the background as a
+# cronjob every so often as root. This script will then read those packages.
+# When clicked, it will run an upgrade via pacman.
+#
+# Add the following text as a file in /usr/share/libalpm/hooks/statusbar.hook:
+#
+# [Trigger]
+# Operation = Upgrade
+# Type = Package
+# Target = *
+#
+# [Action]
+# Description = Updating statusbar...
+# When = PostTransaction
+# Exec = /usr/bin/pkill -RTMIN+8 dwmblocks # Or i3blocks if using i3.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e sb-popupgrade ;;
+	2) notify-send "$(/usr/bin/pacman -Qu)" ;;
+	3) notify-send "🎁 Upgrade module" "📦: number of upgradable packages
+- Left click to upgrade packages
+- Middle click to show upgradable packages" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+pacman -Qu | grep -Fcv "[ignored]" | sed "s/^/📦/;s/^📦0$//g"
diff --git a/.scripts/not needed/popupgrade b/.scripts/not needed/popupgrade
new file mode 100755
index 0000000..29d6230
--- /dev/null
+++ b/.scripts/not needed/popupgrade
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+printf "Beginning upgrade.\\n"
+
+yay -Syu
+pkill -RTMIN+8 "${STATUSBAR:-dwmblocks}"
+
+printf "\\nUpgrade complete.\\nPress <Enter> to exit window.\\n\\n"
+read -r _
diff --git a/.scripts/not needed/tasks b/.scripts/not needed/tasks
new file mode 100755
index 0000000..586300e
--- /dev/null
+++ b/.scripts/not needed/tasks
@@ -0,0 +1,20 @@
+#!/bin/sh
+
+# Originally by Andr3as07 <https://github.com/Andr3as07>
+# Some changes by Luke
+# Rebuild by Tenyun
+
+# This block displays the number running background tasks.  Requires tsp.
+
+num=$(tsp -l | awk -v numr=0 -v numq=0 '{if (/running/)numr++; if (/queued/)numq++} END{print numr+numq"("numq")"}')
+
+# Handle mouse clicks
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e tsp -l ;;
+	3) notify-send "Tasks module" "🤖: number of running/queued background tasks
+- Left click opens tsp" ;; # Right click
+	2) $EDITOR "$0" ;; # Middle click
+esac
+
+[ "$num" != "0(0)" ] &&
+	echo "🤖$num"
diff --git a/.scripts/not needed/torrent b/.scripts/not needed/torrent
new file mode 100755
index 0000000..6527005
--- /dev/null
+++ b/.scripts/not needed/torrent
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+transmission-remote -l | grep % |
+	sed " # The letters are for sorting and will not appear.
+	s/.*Stopped.*/A 🛑/;
+	s/.*Seeding.*/Z 🌱/;
+	s/.*100%.*/N ✅/;
+	s/.*Idle.*/B 🕰️/;
+	s/.*Uploading.*/L ⬆️/;
+	s/.*%.*/M ⬇️/" |
+		sort -h | uniq -c | awk '{print $3 $1}' | paste -sd ' ' -
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e tremc ;;
+	2) td-toggle ;;
+	3) notify-send "🌱 Torrent module" "\- Left click to open tremc.
+- Middle click to toggle transmission.
+- Shift click to edit script.
+Module shows number of torrents:
+🛑: paused
+🕰: idle (seeds needed)
+🔼: uploading (unfinished)
+🔽: downloading
+✅: done
+🌱: done and seeding" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
diff --git a/.scripts/null b/.scripts/null
new file mode 100755
index 0000000..ac8b1ed
--- /dev/null
+++ b/.scripts/null
@@ -0,0 +1 @@
+curl -F"file=@$(find $HOME -type f | dmenu -p "Choose file to be uploaded to null server 0x0.st:" -l 15)" https://0x0.st | xclip -sel c
diff --git a/.scripts/otp b/.scripts/otp
new file mode 100644
index 0000000..1726b1a
--- /dev/null
+++ b/.scripts/otp
@@ -0,0 +1,53 @@
+#!/bin/sh
+
+# Get a one-time password, or add a OTP secret to your pass-otp store.
+
+# The assumption of this script is that all otp passwords are stored with the
+# suffix `-otp`. This script automatically appends newly added otps as such.
+
+# For OTP passwords to be generated properly, it is important for the local
+# computer to have its time properly synced. This can be done with the command
+# below which requires the package `ntp`.
+
+ifinstalled pass pass-otp
+
+dir="${PASSWORD_STORE_DIR}"
+
+choice="$({ echo "🆕add" ; echo "🕙sync-time" ; ls ${dir}/*-otp.gpg ;} | sed "s/.*\///;s/-otp.gpg//" | dmenu -p "Pick a 2FA:")"
+
+case $choice in
+	🆕add )
+		ifinstalled maim zbar xclip || exit 1
+
+		temp="$dir/temp.png"
+		otp="otp-test-script"
+		trap 'shred -fu $temp; pass rm $otp' HUP INT QUIT TERM PWR EXIT
+
+		notify-send "Scan the image." "Scan the OTP QR code."
+
+		maim -s "$temp" || exit 1
+		info="$(zbarimg -q "$temp")"
+		info="${info#QR-Code:}"
+		issuer="$(echo "$info" | grep -o "issuer=[A-z0-9]\+")"
+		name="${issuer#issuer=}"
+
+		if echo "$info" | pass otp insert "$otp"; then
+			while true ; do
+				export name="$(dmenu -p "Give this One Time Password a one-word name:")"
+				echo "$name" | grep -q -- "^[A-z0-9-]\+$" && break
+			done
+			pass mv "$otp" "$name-otp"
+			notify-send "Successfully added." "$name-otp has been created."
+		else
+			notify-send "No OTP data found." "Try to scan the image again more precisely."
+		fi
+
+		;;
+	🕙sync-time )
+		ifinstalled ntp || exit 1
+		notify-send -u low "🕙 Synchronizing Time..." "Synching time with remote NTP servers..."
+		updatedata="$(sudo ntpdate pool.ntp.org)" &&
+		notify-send -u low "🕙 Synchronizing Time..." "Done. Time changed by ${updatedata#*offset }"
+		;;
+	*) pass otp -c ${choice}-otp ;;
+esac
diff --git a/.scripts/pdfconv b/.scripts/pdfconv
new file mode 100755
index 0000000..5a723d7
--- /dev/null
+++ b/.scripts/pdfconv
@@ -0,0 +1,3 @@
+#!/bin/sh
+find . -type f -iname "*.*" -exec soffice --headless --convert-to pdf {} + &&
+pdfunite *.pdf output.pdf
diff --git a/.scripts/pidkill b/.scripts/pidkill
new file mode 100755
index 0000000..e75687f
--- /dev/null
+++ b/.scripts/pidkill
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+prok=$(ps -u $USER -o pid,%mem,%cpu,comm | sort -b -k2 -r | sed -n '1!p' | dmenu -i -l 15 )
+pid=$(echo $prok | awk '{print $1}')
+pname=$(echo $prok | awk '{print $4}')
+
+kill -15 $pid 2>/dev/null
+[ -z $pname ] || dunstify "Terminated process Successfully" "$pname was killed"
+
diff --git a/.scripts/price b/.scripts/price
new file mode 100755
index 0000000..42c84c1
--- /dev/null
+++ b/.scripts/price
@@ -0,0 +1,50 @@
+#!/bin/sh
+
+# Usage:
+#	price <url> <Name of currency> <icon> <Price to show in>
+#	price bat "Basic Attention Token" 🦁
+# When the name of the currency is multi-word, put it in quotes.
+
+[ -z "$3" ] && exit 1
+
+# use $4 as currency, if not passed in use "usd" as default
+currency="${4:-usd}"
+interval="@14d"	# History contained in chart preceded by '@' (7d = 7 days)
+dir="${XDG_DATA_HOME:-$HOME/.local/share}/crypto-prices"
+pricefile="$dir/$1-$currency"
+chartfile="$dir/$1-$currency-chart"
+
+updateprice() { temp="$(mktemp)"
+	curl -s "$currency.rate.sx/1$1" > "$temp" &&
+		mv -f "$temp" "$pricefile" &&
+		curl -s "$currency.rate.sx/$1$interval" > "$temp" &&
+		mv -f "$temp" "$chartfile" ;}
+
+[ -d "$dir" ] || mkdir -p "$dir"
+
+[ "$(stat -c %x "$pricefile" 2>/dev/null | cut -d' ' -f1)" != "$(date '+%Y-%m-%d')" ] &&
+	updateprice "$1"
+
+case $BLOCK_BUTTON in
+	1) setsid "$TERMINAL" -e less -Srf "$chartfile" ;;
+	2) notify-send -u low "$3 Updating..." "Updating $2 price..."
+		updateprice "$1" && notify-send "$3 Update complete." "$2 price is now
+\$$(cat "$pricefile")" ;;
+	3) uptime="$(date -d "$(stat -c %x "$pricefile")" '+%D at %T' | sed "s|$(date '+%D')|Today|")"
+		notify-send "$3 $2 module" "\- <b>Exact price: \$$(cat "$pricefile")</b>
+- Left click for chart of changes.
+- Middle click to update.
+- Shows 🔃 if updating prices.
+- <b>Last updated:
+	$uptime</b>" ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+case "$currency" in
+	usd) symb="$" ;;
+	gbp) symb="£" ;;
+	eur) symb="€" ;;
+	btc) symb="₿" ;;
+esac
+
+printf "$3$symb%0.2f$after" "$(cat "$pricefile")"
diff --git a/.scripts/redeat b/.scripts/redeat
new file mode 100755
index 0000000..e282131
--- /dev/null
+++ b/.scripts/redeat
@@ -0,0 +1,108 @@
+#!/bin/sh
+
+# Check if necessary programs are installed
+for prog in dmenu jq sxiv; do
+	[ ! "$(which "$prog")" ] && echo "Please install $prog!" && exit 1
+done
+# If notify-send is not installed, use echo as notifier
+[ ! "$(which notify-send)" ] && notifier="echo" || notifier="notify-send"
+
+# args
+while [ $# -gt 0 ]; do
+	case $1 in
+		-l|--limit)
+			shift
+			LIMIT=$1
+			case $LIMIT in
+				''|*[!0-9]*)
+					echo 'limit is NaN'
+					exit 1
+			esac
+			shift
+			;;
+		-f|--filter)
+			FILTER=1
+			shift
+			;;
+		-k|--keep)
+			KEEP=0
+			shift
+			;;
+		-v|--verbose)
+			VERBOSE=1
+			shift
+			;;
+		*)
+			subreddit=$1
+			shift
+			;;
+	esac
+done
+
+# Default config directory
+configdir="${XDG_CONFIG_HOME:-$HOME/.config}/redyt"
+
+# Create .config/redyt if it does not exist to prevent
+# the program from not functioning properly
+[ ! -d "$configdir" ] && echo "Directory $configdir does not exist, creating..." && mkdir -p "$configdir"
+
+# Default subreddit that will be inserted in "subreddit.txt"
+# if it does not exist
+defaultsub="linuxmemes"
+
+# If subreddit.txt does not exist, create it to prevent
+# the program from not functioning properly
+[ ! -f "$configdir/subreddit.txt" ] && echo "$defaultsub" >> "$configdir/subreddit.txt"
+
+# If no argument is passed
+if [ -z "$subreddit" ]; then
+	# Ask the user to enter a subreddit
+	subreddit=$(dmenu -p "Select Subreddit r/" -i -l 10 < "$configdir/subreddit.txt" | awk -F "|" '{print $1}')
+
+	# If no subreddit was chosen, exit
+	[ -z "$subreddit" ] && echo "no sub chosen" && exit 1
+fi
+
+# Default directory used to store the feed file and fetched images
+cachedir="/tmp/redyt"
+
+# If cachedir does not exist, create it
+if [ ! -d "$cachedir" ]; then
+	echo "$cachedir does not exist, creating..."
+	mkdir -p "$cachedir"
+fi
+
+# Send a notification
+[ $VERBOSE = 1 ] && $notifier "Redyt" "📩 Downloading your 🖼️ Memes"
+
+# Download the subreddit feed, containing only the
+# first 100 entries (limit), and store it inside
+# cachedir/tmp.json
+curl -H "User-agent: 'your bot 0.1'" "https://www.reddit.com/r/$subreddit/hot.json?limit=${LIMIT:-100}" > "$cachedir/tmp.json"
+
+# Create a list of images
+imgs=$(jq '.' < "$cachedir/tmp.json" | grep url_overridden_by_dest | grep -Eo "http(s|)://.*(jpg|png)\b" | sort -u)
+
+# If there are no images, exit
+[ -z "$imgs" ] && $notifier "Redyt" "sadly, there are no images for subreddit $subreddit, please try again later!" && exit 1
+
+# Download images to $cachedir
+for img in $imgs; do
+	if [ ! -e "$cachedir/${img##*/}" ]; then
+		wget -P "$cachedir" $img
+	fi
+done
+
+# Send a notification
+[ $VERBOSE -eq 1 ] && $notifier  "Redyt" "👍 Download Finished, Enjoy! 😊"
+rm "$cachedir/tmp.json"
+
+# Display the images
+if [ $FILTER = 1 ]; then
+	sxiv -a -o "$cachedir"
+else
+	sxiv -a "$cachedir"
+fi
+
+# Once finished, remove all of the cached images
+[ ! $KEEP = 1 ] && rm "${cachedir:?}"/*
diff --git a/.scripts/reload_dunst b/.scripts/reload_dunst
new file mode 100755
index 0000000..525e52a
--- /dev/null
+++ b/.scripts/reload_dunst
@@ -0,0 +1,21 @@
+#!/bin/sh
+#
+# Script to set colors generated by 'wal'
+# https://github.com/dylanaraps/wal
+ # Source generated colors.
+ . "${HOME}/.cache/wal/colors.sh"
+
+ reload_dunst() {
+ pkill dunst
+ dunst \
+ -frame_width 0 \
+ -lb "${color0}" \
+ -nb "${color0}" \
+ -cb "${color0}" \
+ -lf "${color7}" \
+ -bf "${color7}" \
+ -cf "${color7}" \
+ -nf "${color7}" &
+}
+
+reload_dunst
diff --git a/.scripts/rsyncfon b/.scripts/rsyncfon
new file mode 100755
index 0000000..aa6a643
--- /dev/null
+++ b/.scripts/rsyncfon
@@ -0,0 +1,24 @@
+#!/bin/bash
+
+echo "Welcome to rsyncfon a fon to pc and vice-versa file-syncing script using the rsync algorithm!"
+echo -e "What would you like to do?\r\n1)sync from phone to pc 2)sync from pc to phone "
+read option
+case "$option" in
+	"1")
+		echo -e "Enter public IP on mobile device (starting with 192.): \r\n!Make sure the device and the desktop are connected to the same network!"
+		read IP
+		echo "Enter file/folder to be rsync'd (Leave empty if entire sdcard) (/sdcard/*)"
+		read file
+		echo "Enter desination path on PC \r\n!!!Make sure to check whether it had sufficient space or not!!!"
+		read dest
+		rsync --update --progress -e 'ssh -p 2222' -azv $IP:/sdcard/$file $dest;;
+	"2")
+		echo "Enter file/folder from pc to be rsync'd"
+		read file
+		echo "Enter public IP"
+		read IP
+		echo "Enter destination location( /sdcard/*)"
+		read dest		
+rsync --update --progress -e 'ssh -p 2222' -azv $file root@$IP:$dest
+esac
+
diff --git a/.scripts/serch b/.scripts/serch
new file mode 100755
index 0000000..0e2acfe
--- /dev/null
+++ b/.scripts/serch
@@ -0,0 +1,5 @@
+#!/bin/sh
+sudo -A find / -type f -o -type d -path '/proc/*' -prune| 
+dmenu -i -p 'Directories/Files to search:' -l 15 | 
+sed "s/.*/'&'/" | 
+xclip -sel c
diff --git a/.scripts/setbg b/.scripts/setbg
new file mode 100755
index 0000000..f267a3a
--- /dev/null
+++ b/.scripts/setbg
@@ -0,0 +1,23 @@
+#!/bin/sh
+
+if [ -z "$1" ]; then
+    echo "Chosing a random wallpaper..."
+    wall=$(find $HOME/Pictures/Wallpaper/w/wow -type f | shuf -n 1)
+    echo "Setting up the wallpaper: $(echo $wall|cut -d '/' -f 8)" 
+else
+    wall="$1"    
+fi
+
+echo "Setting up the wallpaper: $(echo $wall)" 
+xwallpaper --zoom $wall &&
+echo "Generating pywal color schemes..."
+wal -n -i $wall >/dev/null &&
+echo "dwm reading Xresources color values at runtime"
+xdotool key super+F5
+pywal-discord
+$HOME/.local/usr/wal-telegram/wal-telegram
+ln -sf ~/.cache/wal/dunstrc ~/.config/dunst/dunstrc
+pkill dunst
+dunst &
+#(cd $HOME/.local/src/dwm && sudo make clean install>/dev/null) 
+echo "^_^ Enjoy your new look!!!"
diff --git a/.scripts/setdef b/.scripts/setdef
new file mode 100755
index 0000000..ed02376
--- /dev/null
+++ b/.scripts/setdef
@@ -0,0 +1,7 @@
+#!/bin/sh
+#To retuen dwm and st to their default vanilla state
+xwallpaper --clear
+xrdb -remove
+xdotool key alt+shift+q
+sleep 5
+picom --experimental-backends
diff --git a/.scripts/st-copyout b/.scripts/st-copyout
new file mode 120000
index 0000000..e822e4a
--- /dev/null
+++ b/.scripts/st-copyout
@@ -0,0 +1 @@
+/home/saumit/.local/src/st/external-pipe_scripts/st-copyout
\ No newline at end of file
diff --git a/.scripts/st-urlhandler b/.scripts/st-urlhandler
new file mode 120000
index 0000000..0d8625f
--- /dev/null
+++ b/.scripts/st-urlhandler
@@ -0,0 +1 @@
+/home/saumit/.local/src/st/external-pipe_scripts/st-urlhandler
\ No newline at end of file
diff --git a/.scripts/sxivf b/.scripts/sxivf
new file mode 100755
index 0000000..a555a73
--- /dev/null
+++ b/.scripts/sxivf
@@ -0,0 +1,8 @@
+#!/bin/sh
+
+if command -v sxiv >/dev/null 2>&1; then
+    if [ -d "${@: -1}" ] || [ -h "${@: -1}" ]; then
+        sxiv -t "$@"
+    else
+        sxiv    "$@"
+fi
diff --git a/.scripts/todo b/.scripts/todo
new file mode 100755
index 0000000..17d7415
--- /dev/null
+++ b/.scripts/todo
@@ -0,0 +1,28 @@
+#!/bin/sh
+#
+# Write/remove a task to do later.
+#
+# Select an existing entry to remove it from the file, or type a new entry to
+# add it.
+#
+
+file="$HOME/.todo"
+touch "$file"
+height=$(wc -l "$file" | awk '{print $1}')
+prompt="Add/delete a task: "
+
+cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
+while [ -n "$cmd" ]; do
+ 	if grep -q "^$cmd\$" "$file"; then
+		grep -v "^$cmd\$" "$file" > "$file.$$"
+		mv "$file.$$" "$file"
+        height=$(( height - 1 ))
+ 	else
+		echo "$cmd" >> "$file"
+		height=$(( height + 1 ))
+ 	fi
+
+	cmd=$(dmenu -l "$height" -p "$prompt" "$@" < "$file")
+done
+
+exit 0
diff --git a/.scripts/trashy b/.scripts/trashy
new file mode 100755
index 0000000..3318e41
--- /dev/null
+++ b/.scripts/trashy
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+trashfiledir=$(find $HOME -type f -o -type d | dmenu -i -p "File to be deleted:" -l 15| awk '{printf('\"%s\"\n', $0);}')
+
+trash-put $trashfiledir
diff --git a/.scripts/upmenu b/.scripts/upmenu
new file mode 100755
index 0000000..f600e3a
--- /dev/null
+++ b/.scripts/upmenu
@@ -0,0 +1,46 @@
+#!/bin/sh
+
+# hello guys its mokuken!!
+
+function upmenu {
+        options="Upload a File\nRecent Uploads\nCancel"
+        selected=$(echo -e $options | dmenu -l 3 )
+		if [[ "$selected" == "Upload a File" ]]; then
+		
+		target="$1"
+		[ -z "$target" ] && target="$(realpath .)"
+		
+		while :; do
+		        sel="$(ls -1a "$target" | grep -v '^\.$' | dmenu -l 25 )" || exit
+		        if [ "$(echo "$sel" | cut -b1)" = "/" ]; then
+		                newt="$sel"
+		        else
+		                newt="$(realpath "$target/$sel")"
+		        fi
+		        if [ -e "$newt" ]; then
+		                target="$newt"
+		                if [ ! -d "$target" ]; then
+		                        echo "Location: $target"
+								command="curl -s -F'file=@$target' https://0x0.st"
+               					echo "Executing: $command"
+
+               					url=$(eval $command)
+              					echo "URL: $url"
+
+              					printf "$url" | xclip -sel clip
+             					notify-send "File Uploaded" "URL: $url \ncopied to clipboard" -t 5000 -i "$HOME/.program/icon.png"
+
+               					entry="$(date '+%d-%m-%y-%H:%M:%S')    $url    $(echo $target | awk -F'/' '{print $(NF)}')"
+             					echo $entry >> $HOME/.0x0_list
+             					echo "Uploaded"; break
+		                fi
+		        fi
+		done
+		elif [[ "$selected" == "Recent Uploads" ]]; then
+				    cat ~/.0x0_list | dmenu -l 10
+		elif [[ "$selected" == "Cancel" ]]; then
+					return
+				fi
+}
+
+upmenu
diff --git a/.scripts/urbandictserch b/.scripts/urbandictserch
new file mode 100755
index 0000000..c007d60
--- /dev/null
+++ b/.scripts/urbandictserch
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+search=$(echo "" | dmenu -p 'Urban Dictionary:'|sed 's/ /%20/g')
+
+curl -s "https://api.urbandictionary.com/v0/define?term={$search}" | jq '.' | grep --color=always definition | awk 'BEGIN {RS="definition"; ORS=""} {print $0""++i}' > /tmp/urban-dic
+
+n=$(wc -l < /tmp/urban-dic)
+touch /tmp/urban-dic.txt && > /tmp/urban-dic.txt
+
+for i in $(eval echo {1..$n}p)
+do
+    sed -n $i /tmp/urban-dic|sed -r "s/\x1B\[[0-9;]*[a-zA-Z]//g" >> /tmp/urban-dic.txt
+done
+cat /tmp/urban-dic.txt | dmenu -l $n -p "$1"i
+
diff --git a/.scripts/volume b/.scripts/volume
new file mode 100755
index 0000000..3cfdc45
--- /dev/null
+++ b/.scripts/volume
@@ -0,0 +1,30 @@
+#!/bin/sh
+
+# Prints the current volume or 🔇 if muted.
+
+case $BLOCK_BUTTON in
+	1) setsid -f "$TERMINAL" -e pulsemixer ;;
+	2) pamixer -t ;;
+	4) pamixer --allow-boost -i 1 ;;
+	5) pamixer --allow-boost -d 1 ;;
+	3) notify-send "📢 Volume module" "\- Shows volume 🔊, 🔇 if muted.
+- Middle click to mute.
+- Scroll to change." ;;
+	6) "$TERMINAL" -e "$EDITOR" "$0" ;;
+esac
+
+[ $(pamixer --get-mute) = true ] && echo 🔇 && exit
+
+vol="$(pamixer --get-volume)"
+
+if [ "$vol" -gt "70" ]; then
+	icon="🔊"
+elif [ "$vol" -gt "30" ]; then
+	icon="🔉"
+elif [ "$vol" -gt "0" ]; then
+	icon="🔈"
+else
+        echo 🔇 && exit
+fi
+
+echo "$icon$vol%"
diff --git a/.scripts/vpn-menu b/.scripts/vpn-menu
new file mode 100755
index 0000000..87d429b
--- /dev/null
+++ b/.scripts/vpn-menu
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+vpnid=$(nmcli con | grep "vpn" | cut -d " " -f 1 | dmenu -p "Select VPN to activate/deactivate")
+actdeact=$(echo -e "up\ndown" | dmenu -p "Activate or Deactivate? (up or down)")
+nmcli con $actdeact id $vpnid
diff --git a/.scripts/wifi-menu b/.scripts/wifi-menu
new file mode 100755
index 0000000..dd5b9b3
--- /dev/null
+++ b/.scripts/wifi-menu
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+choice=$(echo -e "up\ndown\nconnect" | dmenu -p "Do you wish to connect to a wi-fi or disconnect?:")
+
+case $choice in
+    "up"|"down")
+        ssid=$(nmcli -t -f ssid dev wifi| cut -d\' -f2 | dmenu -p "Select Wifi  " -l 20)
+        nmcli c $choice "$ssid" ;;
+    "connect")
+        bssid=$(nmcli device wifi list | sed -n '1!p' | cut -b 9- | dmenu -p "Select Wi-Fi  :" -l 20 | cut -d' ' -f1)
+        pass=$(echo "" | dmenu -P -p "Enter Password  : ") 
+        nmcli device wifi connect $bssid password $pass ;;
+esac
diff --git a/.scripts/wifi-menu-custom b/.scripts/wifi-menu-custom
new file mode 100755
index 0000000..db2fced
--- /dev/null
+++ b/.scripts/wifi-menu-custom
@@ -0,0 +1,22 @@
+#!/bin/sh
+
+choice=$(echo -e "up\ndown\nconnect" | dmenu -p "Do you wish to connect to a wi-fi or disconnect?:")
+
+case $choice in
+    "connect")
+        bssid=$(nmcli device wifi list | sed -n '1!p' | cut -b 9- | dmenu -p "Select Wifi  " -l 20 | cut -d' ' -f1)
+        pass=$(echo "" | dmenu -p "Enter Pswd  ")
+        nmcli device wifi $choice $bssid password $pass;;
+    "up" | "down")
+        ssid=$(nmcli device wifi list | sed -n '1!p' | cut -b 9- | dmenu -p "Select Wifi  " -l 20 | cut -d' ' -f3)
+        nmcli c $choice $ssid;;
+esac
+wifistatus=$(nmcli d | grep wlan0 | cut -d ' ' -f10)
+case $wifistatus in
+    "connected")
+        nmcli con down eth0 "Wired connection 1";;
+    "disconnected")
+        nmcli con up eth0 "Wired connection 1";;
+esac
+ethstatus=$(nmcli d | grep eth0 | cut -d ' ' -f7)
+notify-send "Ethernet connection is $ethstatus"